The type of hydraulic oil that is most usually found to be certified for use in log splitters is hydraulic oil, which has an AW (Anti Wear) grade of 32. This is the type of hydraulic oil that is most commonly used in log splitters.
The documentation that comes with a log splitter should have instructions on how to select the appropriate hydraulic oil. When you buy some brands, the hydraulic oil is already included in the packaging, while other brands require you to buy it separately.
You may get hydraulic oils at any hardware store, farm equipment merchant, or company that specializes in automotive goods and materials, as well as on Amazon.com. It is strongly advised that you never operate a log splitter if the necessary hydraulic oil is missing from the machine.
What Hydraulic Oil Do You Use for a Log Splitter?
Hydraulic oil with an AW grade of 32 is what you will want to use with a log splitter.
This particular sort of oil ensures that gears and other mechanical parts remain lubricated even when the temperature ranges from extremely hot to extremely cold.
In addition to this, it raises the pressure that is present within the hydraulic system.
To check the current price and availability of AW32 Hydraulic oil, click here to view the listing on Amazon.
How Much Hydraulic Fluid Do You Put in a Log Splitter?
The hydraulic fluid reservoir capacity of the majority of log splitters falls within a range that is anywhere from 3.5 to 7 liters, with the precise range being largely dictated by the size and power of the log splitter.
It is in your best interest to validate this information with the business that was responsible for the production of the items before you make a choice to make a purchase.
Approximately 150 hours of continuous operation are possible with a reservoir that is completely loaded with high-quality hydraulic fluid. This is the maximum amount of time that the reservoir can hold.
Can You Mix Hydraulic Fluid in a Log Splitter?
Never combine different types of hydraulic fluid in your machine. Only one kind of lubricant that has been given the OK should be utilized.
The best course of action to take when it is not known what kind of fluid is currently present in an apparatus is to empty out all of that fluid and then replace it with more fluid of the same kind. This will ensure that the apparatus is not contaminated. This is the method that has been recommended.
How Do You Add Hydraulic Fluid to a Log Splitter?
When the hydraulic fluid level drops to an unsafely low level, your log splitter will experience a significant loss in the amount of power it normally possesses.
Before you can proceed with adding the proper amount of hydraulic fluid, you must first remove the plug that covers the oil-filling hole. The hydraulic fluid container should then be replenished until it is roughly three-quarters full.
After you’ve supplied the proper amount of hydraulic fluid, you’ll need to “bleed” the cylinder so that any trapped air may be expelled. This will allow the cylinder to operate normally. Check that the piston rod has been extended all the way to its maximum length before removing the plug used to fill the oil reservoir.
After that, swiftly turn the release screw so that it is turning in the opposite direction of a clockwise rotation. Because of this, the rod that controls the piston will be dragged back into the cylinder, which will result in the release of some of the compressed air.
Are Hydraulic Fluid and Hydraulic Oil the Same?
The fundamental difference between hydraulic oil and hydraulic fluid is in the use that each one is designed for. Hydraulic fluid can also be used in hydraulic systems.
Automated gearboxes in automobile systems require hydraulic fluid rather than hydraulic oil, it is not viable to use hydraulic oils in these transmissions. Instead, the hydraulic fluid must be used in these transmissions.
However, hydraulic oil is recognized as the most widespread kind of available hydraulic fluid; as a result, many people use these two titles interchangeably, despite the fact that they relate to two separate substances. Hydraulic fluid and hydraulic oil are two different things.
How Often to Change Hydraulic Fluid in a Log Splitter?
The majority of manufacturers recommend changing your fluid every fifty hours as a suggested practice. This is something they support.
On the other hand, if the fluid that you use is of an especially high grade, you should be able to split logs utilizing this approach for roughly 150 hours. One hundred and fifty hours is typically used as a benchmark, despite the fact that this number can vary greatly depending on the kind of log being divided and how challenging it is.
As long as the system is kept clean and the hydraulic oil is clear, it is normally okay to use the oil until it runs out, as long as it is not polluted. This is true even if the oil has beyond its expiration date.
Best Hydraulic Fluids for Log Splitters
AW22 or 32 It is recommended that the log splitter be serviced with hydraulic oil so that it can work at its best. It is possible to replace hydraulic oil with transmission fluid for automatic transmissions; however, this should only be done when the temperature is lower than 32 degrees Fahrenheit.
Transmission fluid for manual transmissions should not be used as a substitute for hydraulic oil.
When selecting which fluid viscosity grade is going to work the best for your particular system, one of the most significant factors that need to be taken into consideration is the starting viscosity at the minimal ambient temperature.
The highest temperature that the device is designed to function at is in some way dependent upon the highest temperature that can be measured outside. a viscosity range that is not only acceptable but also optimal for the many different components that make up the system.
Here Are Some Recommendations of Brands and Types of Hydraulic Fluids for Your Log Splitter:
Forest Master high-performance hydraulic fluid for electric log splitters.
Ultra1Plus™ ISO 68 AW Hydraulic Fluid | 5 Gallon Pail
Lube King LU02322G Log Splitter Hydraulic Fluid
Maintenance of Your Log-Splitter
A log splitter’s user handbook should come with information on how to select the hydraulic fluid that is most appropriate for the device.
The kind of hydraulic fluid that is most typically found to be certified for use in log splitters is hydraulic oil which has an anti-wear grade of 32. This is the kind of hydraulic fluid that is most commonly used.
This is due to the fact that hydraulic oil is the kind of hydraulic fluid that is most commonly used. This particular kind of fluid ensures that the gears and other mechanical parts remain properly lubricated even when the temperature ranges from extremely cold to extremely hot, allowing them to continue to perform their intended functions even under those conditions.
Never combine different kinds of hydraulic fluid in the device that you are working on at the same time. It is strongly suggested that only one kind of lubricant that has been granted permission for application be used.
When it is not known what kind of fluid is presently there, the best thing to do is to empty out all of that fluid and then replace it with more fluid of the same kind. This is the best course of action to take when it is not known what kind of fluid is now there.
This is the most productive way to approach the situation. As long as the hydraulic fluid is clear and the system is kept clean, it is generally okay to continue using the oil until it is entirely depleted as long as it is kept clean and as long as the system is also kept clean.
Even if the oil is used after the date on which it should have been thrown away, this fact does not change. In automatic transmissions, transmission fluid is sometimes used in place of hydraulic oil because it is a viable alternative. This activity should only be carried out when the temperature is at or lower than 32 degrees Fahrenheit.
Final Thoughts
If you’re anything like me, you’ve already got a good stockpile of high-quality firewood stashed away for those chilly winter nights ahead. If you’re tired of hacking at logs with an axe every time you need firewood, consider investing in a log splitter.
How to choose the right hydraulic oil for your wood splitter should be detailed in the manual. Some brands come with hydraulic oil already installed, while others make you purchase it separately.
Hydraulic oils are sold at Amazon.com, in addition to hardware stores, farm equipment suppliers, and car parts retailers. When hydraulic oil is absent from a log splitter, it is not safe to use the device.