Spring is in the air and as the days get warmer, people enjoy spending more time outdoors. Mountain biking is a fun outdoor activity that also helps people stay in shape. When the sun’s shining, there’s no better way to spend the day than hitting the trails with a mountain bike. However, if there aren’t trails near your house you may have to drive to them.
This could leave you wondering if your mountain bike will fit in your vehicle. If you drive a Ford Escape, then you are in luck. You can fit a mountain bike into a Ford Escape. It’s very easy and you don’t need any special equipment or devices. If you want to go off-road biking somewhere further away from your home, you can pack that bike into your Ford Escape.
It may take some adjusting, but soon enough you’ll be ready to start exploring new trails on your mountain bike. Keep reading to find out how to fit a mountain bike into your Ford Escape. This will be a tight fit, so it’s important to follow instructions carefully.
How To Fit Your Mountain Bike In a Ford Escape
Are you ready to go see some new trails? It’s time to get your Ford Escape ready to travel with your mountain bike. One thing to remember before you start is that this is a very tight fit and there will only be enough room for one mountain bike in the Ford Escape. If you have a friend that wants to come along, they will have to drive themselves.
When you’re ready to hit the road, this is what you need to do to safely get your mountain bike in a Ford Escape without a hassle:
Did you know that one of the best and most versatile ways to fit a mountain into your Ford Escape is to use a mountain bike rack like this one. It attaches to the rear of your SUV on the roof, trunk, and rear bumper.
The Easiest Way to Fit a Mountain Bike Into a Ford Escape
The first thing you will need to do is put down your rear seats into a folding position. This will provide enough room in the back for your mountain bike.
Open the liftgate at the back of the vehicle.
Once open, you may notice that the folded seats are raised a few inches higher than the trunk. Ford Escapes come with a cargo floor, which you can set up into an upper position so it is level with the folded rear seats. Make sure everything is safely in place before getting the bike ready.
When getting the bike ready, start with the back wheel positioned towards the Ford Escape’s rear bumper.
Stand towards the center of the vehicle, with the bike on either your right side if you’re right-handed or left side for people who are left-handed.
If you are on the right side of the mountain bike, it’s important to make sure your mountain bike has a sprocket guard. The sprocket is that wheel of teeth that rotates the chain. If it doesn’t have a guard, then there’s a risk of getting grease all over your seat. If you don’t have a sprocket guard, put the bike inside from the left side.
Put the bike’s kickstand up, and move the pedal that’s closest to you to a low position. This will help make it easier to put the bike in the vehicle because the pedal will end up moving out of your way as you put the vehicle in. If the pedal isn’t lowered, it could get in your way and make this process more difficult than it needs to be.
Those who are installing the bike from the right side should pick it up and place the rear tire against the passenger interior trim on the side.
Those who are installing the bike from the left side should place the tires against the driver’s side.
Now that you have the bike inside, tilt it to a 45-degree angle towards yourself. Carefully roll it into the vehicle, but make sure to keep the rear wheel towards the intersection of the cargo floor.
Once you have the bike inside, you can lay it down. It really is that easy to get set up! Close the liftgate, and enjoy your time on the trails.
Tips for Getting a Mountain Bike to Fit in a Ford Escape
Going out on a mountain bike is a great way to spend the day, and knowing that you can fit it in a Ford Escape makes life much easier. However, not every model of mountain bike is the same so some may need a bit more work than others to fit in smoothly. People with larger mountain bikes may have to make more adjustments to get their bikes to fit.
After laying the mountain bike down, does it appear that the bike may be slightly too big? Some people need to tilt the handlebars 90-degrees once they lay their bike down so it will fit better. If it looks like you may have trouble closing the liftgate, it’s a good idea to rotate those handlebars. Once you rotate them, it should be easier to close the liftgate.
Another trick that many mountain bike owners find helpful is to rotate their handlebars by 180-degrees before they roll the bike into their vehicle. This will make it so the front wheel is pointing towards the back wheel.
If you like to keep things as tidy as possible, once you have the cargo floor set up in place you can line it with old towels or blankets. This way your seats will stay clean, and you won’t have to worry about any knicks or scratches in the fabric. If you plan ahead, getting your mountain bike in a Ford Escape won’t be a challenge at all.
Remember, when something doesn’t feel right not to force it. You may need to readjust your handlebars or check that you have the bike in the right spot if you are having difficulties. The mountain bike should roll in smoothly if you are doing everything correctly.
If you drive a Ford Escape, then you’ll be able to take your mountain bike anywhere you’d like. One thing you should keep in mind though is that your mountain bike is going to need all the space in the back of your Escape. It’s recommended that you don’t have anything else in the back with your mountain bike so it has a safe ride.
You don’t want to risk having anything hit or bump into your mountain bike as you’re driving. It’s also important to remember you will only have room for one bike back there. If you plan on traveling with someone you will either need to invest in a bike rack or take separate vehicles. While mountain bikes can fit, they don’t leave room for much else.
Getting your mountain bike inside a Ford Escape may be a tight fit, but it’s very easy to do. It only takes a few minutes, and then you will be ready to head out to the trails. One thing to keep in mind is that some mountain bikes are larger than others, so it could take a bit of adjusting to make yours fit if you have a larger model.